-
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail Strut Channel Compatible 6’6” Rail w/Two Fasteners: This custom light mover rail, with its unique top cut out and special fasteners, is made for easy attachment to strut channel, also known as Unistrut®. It comes with a custom fastening system of two connectors. And, these are specifically made for mounting these custom Rails to commercial strut channel. That mounting can be inline, perpendicular, at a 45, or at any angle and configuration. Note: Fits narrow strut channel at 1 5/8ths for size. Strut channel compatible Rails are a custom order item. See specific indoor growing equipment product details farther below.
-
A pair of Light Rail Switch Stop stoppers (slide nuts/ thumb screws). Compatible with Light Rail 3.5 and Light Rail 4.0, two come in a set. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 2-Meter (6’6”) New Rail: The 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. The all new patent-pending design features of the LightRail RoboBar, built exclusively to move larger LED grow lights with LightRail light movers. Compatible with LightRail 3.5 and LightRail 4.0 exclusively, the RoboBar dimensions are 34" x 30" (86cm x 75 cm), so provides triangulated, acute hanging angles for extra smooth travel along the Rail. The four hanging points provide easy support for any LED grow light including all 3'x3' (.9m x .9m), all 4'x4' (1.2m x 1.2m), all oversized rectangular LED grow lights, just any of the larger LED grow lights, all brands/any dimensions. With the RoboBar's structural support, larger LED grow lights moved on a Light Rail can cover 50% more linear area per grow light. See important product details below with video link. Note: Does NOT include Rail, Motor or Grow Light. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail Add-A-Lamp Kit, no Rail incl; match w/Strut Rail or LightRail Grow Tent, Extreme Duty Trolley Wheels Now as Standard: As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover motor, and with Extreme Duty Trolley Wheels now as standard and rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp. This Add A Lamp Kit includes a 6’ push/pull rod, in two 3’ sections with a coupler nut, an Auxiliary Trolley, hardware, and instructions. No Rail is included. No Motor included. Perfect Add A Lamp components to use in the LightRail Grow Tents since those grow tents already have an included Rail section , or to match with a Strut Channel Compatible Rail, should that be a better match for your space. Or, for any grow equipment setup, these are the perfect Add A Lamp components if you already have a Rail. See specific indoor grow setup product details farther below. Do you have standard rectangular grow lights that you want to turn sideways to the direction of travel for wider coverage? In this instance, you simply use the 24" Light Rail RoboStiks (purchased separately). Do you have larger 4’x4’ LED grow lights: In this instance, you simply link the 40" Light Rail RoboBars (purchased separately) together with the provided Add A Lamp Extender Rods and Hardware, see details below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail Add-A-Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover Motor, and now with pre-installed Extreme Duty Trolley Wheels which are rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp in-line, along with adjustable run length and indoor grow light spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover Rail (6’6” total length), a 6’ push/pull rod, an Auxiliary Trolley, hardware, and instructions. It comes complete. No Motor included, no grow lights included. Do you have standard rectangular grow lights that you want to turn sideways to the direction of travel for wider coverage? In this instance, you simply use the 24" Light Rail RoboStiks (purchased separately). New design for larger 4’x4’ LED grow lights: In this instance, you simply link the 34" Light Rail RoboBars (purchased separately) together with the provided Add A Lamp Extender Rods and Hardware. See details below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 2-Meter (6’6”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. The blemished 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
-
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Add-A-Lamp to RoboStik Hardware: This is used to connect a RoboStik to the Auxiliary Trolley in the Add-A-Lamp indoor grow kit. And, this grow light mover accessory item allows a horizontal indoor grow light to run perpendicular. So, that movement is now 90 degrees from the direction of travel. And, with the grow light system positioned sideways, we have a wider pattern of indoor plant light. Note: This is only needed for RoboStiks used with Add-A-Lamp indoor grow kits. See specific indoor grow equipment product details farther below. SKU: AAL RB HDW -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Auxiliary Trolley: The LightRail Auxiliary Trolley with Extreme Duty Trolley Wheels now as standard, and rated to 60 lbs. It is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and has many indoor grow equipment uses. It is the same Auxiliary Trolley that you would find in the Add A Lamp Kit. For uses, in addition to moving a second indoor grow light as part of the Add A Lamp Kit, it can also be used to aid in the securing of any vent tubing or grow light cords. See specific indoor grow equipment product details farther below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail 1-Meter (3’3”) Extender Rail: The one meter Extender Rails have a variety of uses. When added to the standard 2-meter Rail, they can be used with the Auxiliary Trolley to aid in the festooning of vent tubing, or one can match with a Light Rail Motor to fit into a 4x4 grow tent. Another use might be to run indoor garden lights over a 9'9" (3 meters) area instead of a 6'6" (2 meters) area during situations when less light is needed such as early growth/seedlings or with low light plants. The Extender Rail is compatible with Light Rail 3.0, 3.5, 4.0 and 4.20 and comes with pins, allowing a Motor to cross the seam of the Rail. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail Rail Alignment Pins and if needed, then three are needed per grow equipment Rail seam. Three Light Rail Rail Alignment Pins come per set. Typically each grow light in the indoor grow room stays on it's own Light Rail system Rail. But, for the farther grow light travel distance in a greenhouse lighting setting with some natural indoor plant light, we can get a longer run. See below. SKU: RAP
