LightRail® 3.5 IntelliDrive Grow Light Mover Kit

LightRail 3.5 KIT (LR3.5 ID9 KIT)

LightRail 3.5 IntelliDrive Kit, the made in the USA choice that’s rated for continuous use. Keep it real, keep it LightRail.

LightRail 3.5 IntelliDrive Kit comes complete with a 10rpm Motor and a two-piece 2 meter (6’6”) Rail. And it comes with installation hardware and instruction. Also, the LightRail 3.5 IntelliDrive indoor grow kit can also be purchased as the Motor only with installation hardware and instructions. So, that’s perfect for anyone who already has a light mover rail. Or, it’s perfect for anyone who wants to purchase their light mover rail separately. LightRail 3.5 IntelliDrive grow light systems travel at 10 RPM. So, that equals approximately 4 feet (1.2 meters) per minute. And, this grow light mover has a zero to sixty-second adjustable time delay for pausing the grow lamp at the end of each run. LightRail 3.5 IntelliDrive indoor grow system helps promote even growth from end to end. And, this grow light mover allows for equal light-time for the entire indoor grow light run.

Buy Now
  • Easy Installation
  • Solidly Constructed
  • 2 Year Manufacturer Warranty
  • Eco Friendly Efficiency Product
  • Scalable and Customizable
  • Made in the USA
  • Runs on Only 5.5 Watts
  • Instrument Grade Drive Motor
  • Flammability Ratings (UL 5 VB)
  • Electrical Certifications
    (C CSA US or CE)

LightRail 3.5 IntelliDrive will move any weighted grow lights

LightRail 3.5 IntelliDrive, an integral part of our grow equipment, will move any weighted grow light.

Note: For specialty grow lights with a long wingspan including light bars, we recommend using an Auxiliary Trolley to hold the other end of the grow light onto the Rail, or using LightRail 5.0.

LightRail 3.5 is a scalable system for our indoor grow lights where up to three indoor grow lights can move in-line. That’s in addition to Add A Lamp Kits. So, that’s all possible from the use of one LightRail IntelliDrive 3.5 Motor. And, LightRail light movers are perfect for any indoor grow light systems or supplemental greenhouse lighting. This grow light mover also works for four season greenhouse grow lights, grow tent setups and larger commercial grow operations. LightRail IntelliDrive 3.5, the DIY light mover scalable for any space, should be considered an important part of our indoor growing kits. And, this grow light mover should be an integral part of any indoor grow light system or greenhouse. LightRail 3.5 IntelliDrive has a 0-60 second adjustable time delay for the ends of each run, and the travel length can be set anywhere along the Rail by placing the Switch Stop stoppers where you like.

Note: LightRail 3.5 runs on 120 Volt so works in the US and Canada, but is not compatible to European 220 Volt electrical. In that case, LightRail 4.0 is the light mover of choice in that it has an adaptable transformer power cord and runs on 12 VDC so works in both the US and in Europe. A proper country-specific plug end would be needed, and we have EU and UK plug ends available upon request.

Indoor plant light should be maximized

Grow equipment, especially indoor plant light, should always be maximized. And, LightRail light movers are the most effective way to get the most out of our indoor grow setup. And, that’s for all indoor growing kits.

LightRail 3.5 Motor
Buy Now
Download Instructions

Did you know … Stationary grow lighting only shines indoor plant light on the parts of leaves that are directly beneath it. This can cause limited growth and even damage to the plant similar to sunburn. LightRail light mover indoor growing systems, including the LightRail 3.5 IntelliDrive Kits, solve this problem of stationary indoor garden lights. Grow light movers move the indoor grow lights over the tops of plants. So now, the leaves get light at different angles. This grow light system change lights up all the plant surfaces. So, more of the leaves are actually working for the plant. With stationary indoor grow lights, light energy can also be lost because it cannot diversify itself in order to allow our plants to absorb it at the optimum levels. But with LightRail light movers, the correct intensity of light shines on each leaf for 40% of the photoperiod. This allows the plant to reach optimum Leaf Area Index, the most important factor in increasing yield.

Closer, better grow lamp quality right to the canopy

Also, by moving our grow lamps, we can now safely get our indoor grow lights closer to our plants.  That gives us a more efficient use of the grow lights ppfd and gives us maximum PAR right to the canopy. LightRail grow light movers give us the best way to maximize our indoor grow light setup. Solidly made in the USA since 1986, LightRail 3.5 IntelliDrive is the DIY light mover of choice with an instrument grade drive motor. And, that light mover motor runs on only about 5 watts. LightRail also has digital control circuitry, heavy duty ball bearing carrier wheels and a self-clutch drive design with automatic traction control.

Made in the USA, LightRail 3.5 IntelliDrive has important ratings

Manufactured by Gualala Robotics, LightRail has important electrical certifications (C CSA US or CE). And, these grow light movers have flammability ratings (UL 5 VB) and are RoHS compliant. The LightRail indoor grow kit has a two year manufacturer warranty. And, it runs at a safe 28-42 degrees C with a flame retardant electrical enclosure, as it should be. Conversely, imitator light movers run as hot as 107 C (170 F) and their electrical enclosures are likely made of flammable plastic. Without quality, there is no value. And if it does not say Gualala Robotics, it is not a LightRail.

Scalable and expandable to any size indoor grow system

LightRail 3.5 IntelliDrive, is the DIY light mover for scalability. And, indoor plant light, should always be maximized and LightRail is the most effective way to get the most out of your grow light system and indoor growing equipment. That’s for any indoor grow system or greenhouse, so let us help you plan out your space.  Simply let us know your planted area dimensions and the number of lights to move. And, we’ll then email you a custom schematic.  LightRail is the most effective way to get the most out of our indoor grow setup and specifically, our indoor growing systems.


LightRail 3.5 Service and Repair

Having Trouble? Check out our Trouble Shooting page.