AAL INET KIT
Light Rail Add A Lamp Kit, Extreme Duty Trolley Wheels Now as Standard

The LightRail light mover Add A Lamp allows the grow light mover motor to move up to three indoor grow lights with one LightRail light mover motor; Extreme Duty Version.
LightRail Add A Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: As part of your indoor growing equipment, this is the easiest way to move a second or third indoor grow light. And, that’s all from your one LightRail light mover motor. The Add A Lamp Kit Extreme Duty Version takes it to another level with pre-installed Extreme Duty Trolley Wheels rated to 60 lbs. This grow light system is compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 indoor grow system. And, the LightRail Add-A-Lamp Kit allows for extended coverage for an additional indoor grow light. So, how this works includes an adjustable run length and grow lamp spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover rail (6’6” total length). And, it comes with a 6’ push/pull rod, an Auxiliary Trolley, hardware and instructions. This grow light system comes complete.
With the LightRail Add A Lamp Kit, multiple indoor grow lights can be moved

The LightRail Add-A-Lamp Kit allows up to three grow lamps to be moved with just one LightRail Motor.
Note: Up to three indoor grow lights can be moved in-line with this grow light system. For the three indoor garden light configurations, you would have this: There would be a LightRail Add-A-Lamp Kit, then a LightRail 3.5 or a LightRail 4.0 Kit then another LightRail Add-A-Lamp Kit. For moving two indoor grow lights in-line, you would have a LightRail 3.5 or 4.0 Kit and then an Add-A-Lamp Kit. Also note, the LightRail 4.20 Kit (see product page) comes with one Add-A-Lamp Kit included.
Hint: For a tighter fit, the Add-A-Lamp Kit together with your LightRail 3.5 or 4.0 Kit can be used with light mover rail halves only. And, that DIY light mover configuration would have 1-3 foot gaps in between the light mover rail halves. So, this allows for more grow light system space flexibility. And, the indoor plant light will fill into the gap areas from both sides. This grow light system configuration gives good grow lamp coverage for the entire area including the “gap plants”.
Larger LED grow lights with the Add A Lamp Kit using RoboBar and extra hardware included
If you have larger LED grow lights and are using RoboBars, the Add A Lamp Kit can be used with the Light Rail RoboBar with minor setup changes. In this instance, both 6’6″ Rails would be gapped be 1-3 feet (up to 1m), and the Add A Lamp Kit’s Extender Rod (push/pull rod) will be attached from RoboBar to RoboBar. That’s instead of Motor to Auxiliary Trolley as with the standard Add A Lamp Kit setup. Special instructions and extra hardware will be included for this RoboBar to RoboBar connection.
Suggested travel distance? About 3’ (1m) Switch Stop to Switch Stop. This will likely light up the 6’6” (2m) Rail length nicely, as half the light from your lamp goes beyond that stopper setting and this happens at both ends of the lamp’s travel, with grow light pattern coverage going even farther. Larger LED grow lights can move farther with a 1-3′ (up to 1m) gap in between inline Rails.
Suggested time delay setting? At 3’(1m) of travel, a time delay setting of about 20-30 seconds might be just right. You can then see over time if any adjustments are needed. Larger LED grow lights will do best with a maximum time delay of 60 seconds.
Manufactured by Gualala Robotics and a part of the LightRail brand. It’s all about quality constructed, instrument grade robotics. Made in the USA and you can only get this with LightRail by Gualala Robotics.
How do LightRail light movers work?
It’s a two-part effect and it’s brilliantly simple.
See how this works:
Reviews
There are no reviews yet.