Light Rail Switch Stop Pair

Description

A pair of Light Rail Switch Stop stoppers (slide nuts/ thumb screws). These come as part of the hardware pack for Light Rail 3.5 Kits and Light Rail 4.0 Kits, and they also come with the Light Rail 3.5 Motors and the Light Rail 4.0 Motors. Compatible with Light Rail 3.5 and Light Rail 4.0, two come in a set.

Suggested travel distance? About 3’-4’ (1m) Switch Stop to Switch Stop. This will likely light up the 6’6” (2m) Rail length nicely, as half the light from your lamp goes beyond that stopper setting and this happens at both ends of the lamp’s travel, with grow light pattern coverage going even farther.

Suggested time delay setting?At 3’-4’ (1m) of travel, a time delay setting of about 20-30 seconds might be just right. You can then see over time if any adjustments are needed.

Manufactured by Gualala Robotics and a part of the LightRail brand. It’s all about quality constructed, instrument grade robotics. You can only get this with LightRail by Gualala Robotics.