-
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Extreme Duty Trolley Wheels: These trolley wheels now come stock on all LightRail 3.5 and 4.0 Motors, and all Auxiliary Trolleys, as of October 2020. But, for Motors manufactured before October of 2020, these are a suggested upgrade item for moving multiple grow lights with one Motor +/or heavier indoor garden lights. These grow equipment superstars are engineered with precision bearings for quiet operation. Also, this grow light system upgrade item is compatible with LightRail 3.0, 3.5, 4.0, and 4.20. Plus, it now comes in a new "extremier" design with sealed precision steel ball bearings, perfect for humid environments. And, stronger than ever! Seriously capable, these wheels will turn your LightRail Motor into an industrial workhorse. Rated to 60 lbs per set, this grow light system upgrade comes with a lifetime warranty. Hint: You will want one set of Extreme Duty Trolley Wheels per light moved. So, that is the case whether the grow lamp is under the Motor or under the Auxiliary Trolley of an Add-A-Lamp Kit. See specific indoor grow setup details further below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail Drive Wheel Replacement Kit: Compatible with Light Rail 3.0, 3.5, 4.0 and 4.20, the Drive Wheel Replacement Kit comes with the following: One black Drive Wheel, a tension spring, fasteners and instructions. Note: Drive Wheels are consumable items that will wear over time. So, as you need to, you can easily replace your Drive Wheel when needed. And, we have a video link to help. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail RoboStik: The 24" RoboStik is used for hanging a horizontal indoor grow light perpendicular to the direction of travel. So, this results in a wider pattern of indoor plant light coverage as your indoor grow light travels along the light mover rail. And, it's compatible with Light Rail 3.0, 3.5, 4.0 or 4.20. No Motor included, no grow light included. See specific grow light system details farther below along with two hanging techniques. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 3.5 IntelliDrive Kit, Light Mover Grow Light System: Our most popular light mover, LightRail 3.5 will turn your indoor grow lights into robotic lights. This grow light system will move any indoor grow light approximately 4 feet (1.2m) per minute. LightRail 3.5 IntelliDrive grow light mover has a 0 to 60 second adjustable time delay for pausing the indoor grow light at both ends of its travels, and this helps your grow equipment by promoting even growth and yield from end to end. The LightRail 3.5 Kit also has adjustable travel distance, and comes with preinstalled Extreme Duty Trolley Wheels now as standard. Note: LightRail 3.5 works with 110 volt only and does not work with 220 volt electrical. See specific indoor grow equipment product details farther below. -
LightRail 4.0 or 4.20 Transformer: This is the replacement LightRail transformer power cord for the LightRail 4.0 Motor. And, this power cord comes as part of the LightRail 4.0 Motor, the LightRail 4.0 Kit and the LightRail 4.20 Kit. See specific indoor growing equipment product details farther below. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Rail Hangers for Grow Tents and Greenhouses; Light Rail: Rail Hanger Brackets are simply the easiest solution to hanging the Rails of Light Rail 3.0, 3.5, 4.0 and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four with instructions and zip ties. So, it is complete. See important indoor grow equipment product details farther below including compatibility specs. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail Rail Alignment Pins and if needed, then three are needed per grow equipment Rail seam. Three Light Rail Rail Alignment Pins come per set. Typically each grow light in the indoor grow room stays on it's own Light Rail system Rail. But, for the farther grow light travel distance in a greenhouse lighting setting with some natural indoor plant light, we can get a longer run. See below. SKU: RAP -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail 1-Meter (3’3”) Extender Rail: The one meter Extender Rails have a variety of uses. When added to the standard 2-meter Rail, they can be used with the Auxiliary Trolley to aid in the festooning of vent tubing, or one can match with a Light Rail Motor to fit into a 4x4 grow tent. Another use might be to run indoor garden lights over a 9'9" (3 meters) area instead of a 6'6" (2 meters) area during situations when less light is needed such as early growth/seedlings or with low light plants. The Extender Rail is compatible with Light Rail 3.0, 3.5, 4.0 and 4.20 and comes with pins, allowing a Motor to cross the seam of the Rail. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail 4.0 AdjustaDrive Kit: The Light Rail 4.0 AdjustaDrive Kit has both a 0 to 60-second adjustable time delay for pausing the grow light at both ends of its travels, promoting even growth from end to end; but it also has a 2 to 4 feet (.6 to 1.2 meters) per minute adjustable speed control as the Motor goes along the Rail. This feature covers a wide range of grow light intensities and travel distances and provides considerable flexibility. It comes with preinstalled Extreme Duty Trolley Wheels now as standard. And, the travel length can be set anywhere along the Rail by placing the Switch Stop stoppers where you like. The Light Rail 4.0 AdjustaDrive Kit is the ultimate in light mover control and is compatible with all Light Rail 3.0, 3.5, and 4.20 Rails and accessory items. This indoor grow kit comes complete with a Light Rail 4.0 Drive Motor, a two-piece 2-meter Rail (6’6” total length), mounting hardware, instructions, and a 2-year warranty. Note: Light Rail 4.0 has an adaptable transformer power cord and works with 100 volts to 240 volts, so works in all countries for electrical compatibility. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Auxiliary Trolley: The LightRail Auxiliary Trolley with Extreme Duty Trolley Wheels now as standard, and rated to 60 lbs. It is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and has many indoor grow equipment uses. It is the same Auxiliary Trolley that you would find in the Add A Lamp Kit. For uses, in addition to moving a second indoor grow light as part of the Add A Lamp Kit, it can also be used to aid in the securing of any vent tubing or grow light cords. See specific indoor grow equipment product details farther below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Add-A-Lamp to RoboStik Hardware: This is used to connect a RoboStik to the Auxiliary Trolley in the Add-A-Lamp indoor grow kit. And, this grow light mover accessory item allows a horizontal indoor grow light to run perpendicular. So, that movement is now 90 degrees from the direction of travel. And, with the grow light system positioned sideways, we have a wider pattern of indoor plant light. Note: This is only needed for RoboStiks used with Add-A-Lamp indoor grow kits. See specific indoor grow equipment product details farther below. SKU: AAL RB HDW -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail 4.20 AdjustaDrive Kit: This indoor grow kit for moving two grow lamps comes complete. And, that includes a variable speed Light Rail 4.0 AdjustaDrive Motor and a two-piece 2-meter (6’6” total length) light mover rail. Plus, it comes with an Add A Lamp Kit with another two-piece 2-meter grow light mover rail. Also, it has a 6-foot Push/Pull Rod, Auxiliary Trolley, instructions and hardware for moving two grow lamps inline with the enclosed Motor. In addition, this indoor grow kit comes with pre-installed Extreme Duty Trolley Wheels rated to 60 lbs, with a lifetime warranty. Note: Light Rail 4.20 has an adaptable transformer power cord and works with 100-volt and 240-volt. See specific indoor grow setup product details farther below. Do you have standard rectangular grow lights that you want to turn sideways to the direction of travel for wider coverage? In this instance, you simply use the 24" Light Rail RoboStik (purchased separately). Do you have larger 4’x4’ LED grow lights: In this instance, you simply link the 40" Light Rail RoboBars (purchased separately) together with the provided Add A Lamp Extender Rods and Hardware, see details below.
