LightRail Add-A-Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover motor, and now with pre-installed Extreme Duty Trolley Wheels which are rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp in-line, along with adjustable run length and indoor grow light spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover rail (6’6” total length), a 6’ push/pull rod, an Auxiliary Trolley, hardware, and instructions. It comes complete. See specific indoor grow setup product details farther below.
Light Rail Add A Lamp Kit, Extreme Duty Trolley Wheels Now as Standard, Light Mover Grow Light System
AAL INET KIT
Light Rail Add A Lamp Kit, Extreme Duty Trolley Wheels Now as Standard
LightRail Add A Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: As part of your indoor growing equipment, this is the easiest way to move a second or third indoor grow light. And, that’s all from your one LightRail light mover motor. The Add A Lamp Kit Extreme Duty Version takes it to another level with pre-installed Extreme Duty Trolley Wheels rated to 60 lbs. This grow light system is compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 indoor grow system. And, the LightRail Add-A-Lamp Kit allows for extended coverage for an additional indoor grow light. So, how this works includes an adjustable run length and grow lamp spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover rail (6’6” total length). And, it comes with a 6’ push/pull rod, an Auxiliary Trolley, hardware and instructions. This grow light system comes complete.
With the LightRail Add A Lamp Kit, multiple indoor grow lights can be moved
Note: Up to three indoor grow lights can be moved in-line with this grow light system. For the three indoor garden light configurations, you would have this: There would be a LightRail Add-A-Lamp Kit, then a LightRail 3.5 or a LightRail 4.0 Kit then another LightRail Add-A-Lamp Kit. For moving two indoor grow lights in-line, you would have a LightRail 3.5 or 4.0 Kit and then an Add-A-Lamp Kit. Also note, the LightRail 4.20 Kit (see product page) comes with one Add-A-Lamp Kit included.
Hint: For a tighter fit, the Add-A-Lamp Kit together with your LightRail 3.5 or 4.0 Kit can be used with light mover rail halves only. And, that DIY light mover configuration would have 1-3 foot gaps in between the light mover rail halves. So, this allows for more grow light system space flexibility. And, the indoor plant light will fill into the gap areas from both sides. This grow light system configuration gives good grow lamp coverage for the entire area including the “gap plants”.
Suggested travel distance? About 3’-4’ (1m) Switch Stop to Switch Stop. This will likely light up the 6’6” (2m) Rail length nicely, as half the light from your lamp goes beyond that stopper setting and this happens at both ends of the lamp’s travel, with grow light pattern coverage going even farther.
Suggested time delay setting?At 3’-4’ (1m) of travel, a time delay setting of about 20-30 seconds might be just right. You can then see over time if any adjustments are needed.
Manufactured by Gualala Robotics and a part of the LightRail brand. It’s all about quality constructed, instrument grade robotics. Made in the USA and you can only get this with LightRail by Gualala Robotics.
How do LightRail light movers work?
It’s a two-part effect and it’s brilliantly simple.
See how this works: