End User Support Contact
Email Sales Team End-User Service Dept

Gualala Robotics only
sells direct to garden stores


Gualala Robotics Inc
Sales Office
550 E. 12th Ave #1807
Denver, Colorado 80203
(877) 674-9294
Email Sales TeamEmail our Sales Team



Progressive Gardening Trade Association
Light Rail 3.5 Light Mover


   Ideal for retangular growing areas where 1 lights is "just not enough" or 2 lights would normally be used. The 3.5 can scale down to fit even the smallest garden. Customers love the scalability, power savings and service. Gives more control over individual lights, running on different seasons. It uses no pulleys, chains or gears. The Light Rail 3.5 Intelli Drive is supplied with adjustable switch stops, so lamp travel can be any length you wish. This is perfect for a start-up size garden through to a full growth garden. The standard 6 foot track may also be extended.
  • Fully adjustable run length
  • Instrument grade drive motor totally sealed from the environment runs on only 5.5 watts
  • Intelli-Drive 0-60 Sec end of rail time delay
  • Heavy duty ball bearing carrier wheels
  • Self clutch drive design with automatic traction control
  • No sprockets or chains
hydroponics light mover



  
Required items for standard 6' and 9' system

Cycle time down and back over 6 feet is between 6 and 7 minutes, as you adjust the 0-60 sec end of rail time delay.

Items Needed:
1 - 6 RPM Motor                   [LR3.5ID6US]
1 - 2 Meter Rail                    [LR3-Rail]
OR
1 - 6 RPM Complete Kit        [LR3.5ID6 KIT]




Cycle time down and back over 9 feet is between 6 and 7 minutes, as you adjust the 0-60 sec end of rail time delay.

Items Needed:
1 - 10 RPM Motor                 [LR3.5ID6US]
1 - 2 Meter Rail                   [LR3-Rail]
1 - 1 Meter Extender Rail      [LR3 RX]
OR
1 - 10 RPM Complete Kit      [LR3.5ID10 KIT]
1 - 1 Meter Extender Rail      [LR3 RX]


Light Rail 3.5 indoor plant growing system
What's Intelli Drive?
The all new Light Rail 3.5 Intelli Drive with Solid State Advanced Control's fully integrated PCB Circuitry will give you the control you are looking for. With an adjustable 0-60 second time delay you can "fine tune" the length of delay at each end of your lamp's travel to meet your garden's ever changing needs.



Hardware Reference and Product Code Guide
System shown below: Light Rail 3.5 System and Add-A-Lamp Kit


Mouse over components on the system for more information.