Light Rail 4.0 AdjustaDrive Kit with RoboBar for Stabilizing Larger LED Grow Lights, Light Mover Grow Light System

Description

Light Rail 4.0 AdjustaDrive Kit with RoboBar gives perfect support for larger 4’x4′ LED grow lights

The Light Rail 4.0 AdjustaDrive Kit with RoboBar for smart, interactive function. With the RoboBar’s structural support, larger LED grow lights moved on a Light Rail can cover 50% more linear area per grow light. And, that’s with a Motor that uses only 9 watts. No grow light included.

RoboBar Details: The 34″ x 30″ (86cm x 75 cm) RoboBar (patent pending) consists of two outriggers, one center bar, two heavy duty T-bar connectors, and four corner eye screws for hanging any grow light. Special security features include two individually secured Nyloc connectors to the Motor. To eliminate swinging to the large, flat plane of an LED, there is also the special design feature of triangulated, acute angled hanging points. This provides sway-proofing as the LED moves along the Rail. And, it positions the LED grow light closer to the Motor, which is a vertical space saving feature.

For hanging the Light Rail 4.0 Kit with RoboBar, use the four hanging points of your LED grow light to directly match with the four hanging points of the RoboBar. So, an angled, triangulated connection is likely. Note: If your LED grow light came with just two adjustable rope ratchets or cables for hanging, then purchase two more (hardware store, grow light company) so that there is a rope ratchet or cable for each corner. If your LED grow light came with any other instruments for hanging such as metal wire harps to create two centered hanging points only, you will not use those. Four hanging points are what is needed to use the RoboBar and four hanging points will also give the extra stability needed for the flat plane of any large, moving LED grow light.

Note: Up to three grow lights can move inline using Add A Lamp Kits which now come with an option to accommodate the larger light coverage of these LEDs. In this instance, you simply link the RoboBars together with the provided Add A Lamp Extender Rods and Hardware. For space planning, each 6’6″ (2m) Rail will be gapped by 1-3′ to account for that extra light coverage. Gap areas will get plenty of light from both sides from the moving grow lights. Also for setup planning, half the grow light will go beyond the stopper setting, and that happens at both ends of travel. How this works as a suggested travel setting: The adjustable Switch Stop stopper to Switch Stop stopper setting might be 3′ to 4′ for stopper placement to light up to a 7′ to 8′ space, depending on grow light dimensions. See RoboBar video.

Light Rail 4.0 AdjustaDrive Kit

Light Rail 4.0 AdjustaDrive Kit, Light Mover Grow Light System Details: Light Rail 4.0 grow light mover

has a 0 to 60 second adjustable time delay for pausing the indoor grow light at both ends of its travels, and this helps your grow equipment by promoting even growth and yield from end to end. The Light Rail 4.0 Kit also has adjustable travel distance and adjustable speed of 2-4 feet per minute, and comes with preinstalled Extreme Duty Trolley Wheels now as standard. Note: Light Rail 4.0 works with 110-240 volt electrical, so works in all countries..