-
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail 1-Meter (3’3”) Extender Rail: The one meter Extender Rails have a variety of uses. When added to the standard 2-meter Rail, they can be used with the Auxiliary Trolley to aid in the festooning of vent tubing, or one can match with a Light Rail Motor to fit into a 4x4 grow tent. Another use might be to run indoor garden lights over a 9'9" (3 meters) area instead of a 6'6" (2 meters) area during situations when less light is needed such as early growth/seedlings or with low light plants. The Extender Rail is compatible with Light Rail 3.0, 3.5, 4.0 and 4.20 and comes with pins, allowing a Motor to cross the seam of the Rail. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 2-Meter (6’6”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. The blemished 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 2-Meter (6’6”) New Rail: The 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
-
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail Drive Wheel Replacement Kit: Compatible with Light Rail 3.0, 3.5, 4.0 and 4.20, the Drive Wheel Replacement Kit comes with the following: One black Drive Wheel, a tension spring, fasteners and instructions. Note: Drive Wheels are consumable items that will wear over time. So, as you need to, you can easily replace your Drive Wheel when needed. And, we have a video link to help. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail RoboStik: The 24" RoboStik is used for hanging a horizontal indoor grow light perpendicular to the direction of travel. So, this results in a wider pattern of indoor plant light coverage as your indoor grow light travels along the light mover rail. And, it's compatible with Light Rail 3.0, 3.5, 4.0 or 4.20. No Motor included, no grow light included. See specific grow light system details farther below along with two hanging techniques. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Rail Hangers for Grow Tents and Greenhouses; Light Rail: Rail Hanger Brackets are simply the easiest solution to hanging the Rails of Light Rail 3.0, 3.5, 4.0 and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four with instructions and zip ties. So, it is complete. See important indoor grow equipment product details farther below including compatibility specs. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Extreme Duty Trolley Wheels: These trolley wheels now come stock on all LightRail 3.5 and 4.0 Motors, and all Auxiliary Trolleys, as of October 2020. But, for Motors manufactured before October of 2020, these are a suggested upgrade item for moving multiple grow lights with one Motor +/or heavier indoor garden lights. These grow equipment superstars are engineered with precision bearings for quiet operation. Also, this grow light system upgrade item is compatible with LightRail 3.0, 3.5, 4.0, and 4.20. Plus, it now comes in a new "extremier" design with sealed precision steel ball bearings, perfect for humid environments. And, stronger than ever! Seriously capable, these wheels will turn your LightRail Motor into an industrial workhorse. Rated to 60 lbs per set, this grow light system upgrade comes with a lifetime warranty. Hint: You will want one set of Extreme Duty Trolley Wheels per light moved. So, that is the case whether the grow lamp is under the Motor or under the Auxiliary Trolley of an Add-A-Lamp Kit. See specific indoor grow setup details further below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Add-A-Lamp to RoboStik Hardware: This is used to connect a RoboStik to the Auxiliary Trolley in the Add-A-Lamp indoor grow kit. And, this grow light mover accessory item allows a horizontal indoor grow light to run perpendicular. So, that movement is now 90 degrees from the direction of travel. And, with the grow light system positioned sideways, we have a wider pattern of indoor plant light. Note: This is only needed for RoboStiks used with Add-A-Lamp indoor grow kits. See specific indoor grow equipment product details farther below. SKU: AAL RB HDW -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail Strut Channel Compatible 6’6” Rail w/Two Fasteners: This custom light mover rail, with its unique top cut out and special fasteners, is made for easy attachment to strut channel, also known as Unistrut®. It comes with a custom fastening system of two connectors. And, these are specifically made for mounting these custom Rails to commercial strut channel. That mounting can be inline, perpendicular, at a 45, or at any angle and configuration. Note: Fits narrow strut channel at 1 5/8ths for size. Strut channel compatible Rails are a custom order item. See specific indoor growing equipment product details farther below.
-
LightRail 4.0 or 4.20 Transformer: This is the replacement LightRail transformer power cord for the LightRail 4.0 Motor. And, this power cord comes as part of the LightRail 4.0 Motor, the LightRail 4.0 Kit and the LightRail 4.20 Kit. See specific indoor growing equipment product details farther below. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Light Rail Rail Alignment Pins and if needed, then three are needed per grow equipment Rail seam. Three Light Rail Rail Alignment Pins come per set. Typically each grow light in the indoor grow room stays on it's own Light Rail system Rail. But, for the farther grow light travel distance in a greenhouse lighting setting with some natural indoor plant light, we can get a longer run. See below. SKU: RAP -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Auxiliary Trolley: The LightRail Auxiliary Trolley with Extreme Duty Trolley Wheels now as standard, and rated to 60 lbs. It is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and has many indoor grow equipment uses. It is the same Auxiliary Trolley that you would find in the Add A Lamp Kit. For uses, in addition to moving a second indoor grow light as part of the Add A Lamp Kit, it can also be used to aid in the securing of any vent tubing or grow light cords. See specific indoor grow equipment product details farther below.
