LightRail® 4.0

  • LightRail 4.0 Drive Motors and Kits

    LightRail 4.0 Drive Motors and Kits (5)

  • LightRail 4.0 Rails and Accessories

    LightRail 4.0 Rails and Accessories (13)

  • LightRail 4.0 Nuts and Bolts

    LightRail 4.0 Nuts and Bolts (7)

  • LightRail 4.0 Service and Repair

    LightRail 4.0 Service and Repair (4)

  • LightRail 1-Meter (3’3″) Extender Rail

    $34.95 $27.95
    LightRail 1-Meter (3’3”) Extender Rail: The one meter Extender Rails have a variety of uses. When added to the standard 2-meter Rail, they can be used with the Auxiliary Trolley to aid in the festooning of vent tubing, or with the Add-A-Lamp components, they can enable two grow lights to run in a 9 foot (3 meter) configuration instead of a 12 foot (4 meters) configuration. Another use might be to run indoor garden lights over a 9 foot (3 meters) area instead of a 6 foot (2 meters) area during situations when less light is needed such as early growth/seedlings or with low light plants. The Extender Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and comes with pins, allowing a Motor to cross the seam of the Rail.
     
  • Light Rail 2-Meter (6’6″) Blemished Rail

    $55.00 $43.95
    LightRail 2-Meter (6’6”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. The blemished 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • Light Rail 2-Meter (6’6″) New Rail

    $69.00 $54.95
    LightRail 2-Meter (6’6”) New Rail: The 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • Light Rail 3-Meter (9’9″) Blemished Rail

    $82.00 $65.95
    LightRail 3-Meter (9’9”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. This Rail consists of one 2-meter blemished Rail and one 1-meter Extender Rail, which is pinned so it slides into the main Rail, allowing the Motor to cross the seam. The blemished 3-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • Light Rail Drive Unit Hardware Pack

    $11.90 $9.50
    LightRail Drive Unit Hardware Pack: The Drive Unit Hardware Pack is the installation hardware that comes with LightRail 3.5, 4.0 and 4.20. And, it includes an eye screw and 12 light mover rail mounting screws. It also includes 2 switch stop stoppers as slide nuts and thumb screws and a cable tie. See specific indoor growing equipment product details farther below.
  • Light Rail Drive Wheel Replacement Kit

    $15.00 $12.00
    Light Rail Drive Wheel Replacement Kit: Compatible with Light Rail 3.0, 3.5, 4.0 and 4.20, the Drive Wheel Replacement Kit comes with the following: One black Drive Wheel, a tension spring, fasteners and instructions. Note: Drive Wheels are consumable items that will wear over time. So, as you need to, you can easily replace your Drive Wheel when needed. And, we have a video link to help.
  • LightRail Switch Stop Stoppers – Slide Nuts and Thumb Screws: Compatible with LightRail 3.0, 3.5, 4.0 and 4.20. The LightRail Switch Stop stoppers are used to stop the Motor at the desired location along the light mover rail. And, this is also the location that the Motor would then switch directions. See more specific indoor grow system product details farther below.  
  • Light Rail RoboStik

    $41.00 $33.00
    Light Rail RoboStik: The 24" RoboStik is used for hanging a horizontal indoor grow light perpendicular to the direction of travel. So, this results in a wider pattern of indoor plant light coverage as your indoor grow light travels along the light mover rail. And, it's compatible with Light Rail 3.0, 3.5, 4.0 or 4.20. See specific grow light system details farther below along with two hanging techniques.
  • I-Repair

    $85.00
    I-Repair: This is a refurbish service for LightRail 3.0, 3.5, 4.0 Drive Motors that are not working to expected standards. And, the refurbish service includes a new gearbox. It also includes four new trolley wheels, a new drive wheel, a new 1 year warranty on those parts and return shipping. Note: I-Repair Instructions are detailed farther below.
  • Rail Hangers for Grow Tents and Greenhouses; Light Rail: Rail Hanger Brackets are simply the easiest solution to hanging the Rails of Light Rail 3.0, 3.5, 4.0 and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four (one package needed per Rail) with instructions and zip ties. So, it is complete. See specific indoor grow equipment product details farther below including compatibility specs.  
  • Light Rail Extreme Duty Trolley Wheels

    $28.75 $23.00
    Extreme Duty Trolley Wheels: A suggested upgrade item for moving multiple grow lights with one Motor +/or heavier indoor garden lights.  These grow equipment super stars are engineered with precision bearings for quiet operation. Also, this grow light system upgrade item is compatible with LightRail 3.0, 3.5, 4.0 and 4.20. Plus, it now comes in a new "extremier" design with sealed steel ball bearings, perfect for humid environments. And, stronger than ever! Seriously capable, these wheels will turn your LightRail Motor into an industrial work horse. Rated to 60 lbs per set, this grow light system upgrade come with a lifetime warranty. Hint: You will want one set of Extreme Duty Trolley Wheels per light moved. So, that is the case whether the grow lamp is under the Motor or under the Auxiliary Trolley of an Add-A-Lamp Kit. See specific indoor grow setup details farther below.
  • Add-A-Lamp to RoboStik Hardware

    $5.25 $4.20
    Add-A-Lamp to RoboStik Hardware: This is used to connect a RoboStik to the Auxiliary Trolley in the Add-A-Lamp indoor grow kit. And, this grow light mover accessory item allows a horizontal indoor grow light to run perpendicular. So, that movement is now 90 degrees from the direction of travel.  And, with the grow light system positioned sideways, we have a wider pattern of indoor plant light. Note: This is only needed for RoboStiks used with Add-A-Lamp indoor grow kits. See specific indoor grow equipment product details farther below. SKU: AAL RB HDW