-
LightRail 5.0 Rail Hanging Bracket: Exclusive to LightRail 5.0, this Rail Hanging Bracket is used in conjunction with LightRail 5.0 slide nuts and LightRail 5.0 slide nut screws for mounting the LightRail 5.0 Rail to a board. Each Rail Hanging Bracket comes with two LightRail 5.0 slide nuts (LR5 12 SN) and two LightRail 5.0 slide nut screws (LR5 12 SNS). US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 5.0 Trolley Wheel Replacement: This DIY light mover kit consists of all the white wheels. So, the LightRail 5.0 Trolley Wheel replacement includes the Outer Trolley Wheels (4 count). And, it includes the Inner Drive Trolley Wheels (2 count). And, these are available for purchase for anyone who wants to do this replacement themselves. Note: The newer design for LightRail 5.0 Motors only have the four Outer Trolley Wheels to replace. In that case, use the four like-wheels as your four trolley wheels to replace. See specific indoor grow systems product details farther below. -
LightRail 5.0 Hardware Pack: Specifically for LightRail 5.0, this LightRail 5.0 Hardware Pack is the very one included with a LightRail 5.0 Kit. This indoor grow kit hardware contains all 10 items and fasteners in the quantities originally supplied with the LightRail 5.0 Kit. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 5.0 Rail – 8’ Rail Set: This LightRail 5.0 Rail set consists of a “triple duty” extruded aluminum track and is exclusive to LightRail 5.0. The Rail set is 8 feet long, and that comes in two 4 foot Rail sections that pin together. This feature allows the LightRail Motor to cross at the seam. Also included are the growing equipment parts of Rail Alignment Pins, Rail Coupler, Rail Hanging Bracket, screws and nuts, so everything you need to attach and hang the Rail. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Add-A-Bar Kit for LightRail 5.0: The Add-A-Bar Kit is the way to add a second crossbar to the LightRail 5.0 Kit. And, it includes a LightRail 5.0 Auxiliary Trolley, a crossbar, a push/pull rod, mounting hardware and instructions. See specific grow light system product details farther below. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 5.0 Auxiliary Rail. This is a 4 foot light mover Auxiliary Rail section. And, it is used with LightRail 5.0 exclusively to match the wider track of the LightRail 5.0 Rail. This light mover rail is designed to accommodate a second Add a Bar Kit (AAB KIT LR5). And, that makes a total of three crossbars moved per LightRail Motor. Also, see important grow light system product details farther below including the recommended indoor grow setup. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 5.0 Motor Only: This is the LightRail 5.0 Motor only, so no Rail is included. Compatible with all LightRail 5.0 items, the LightRail 5.0 Motor has steel -on-steel carrier bearings. And, it has a high torque 4rpm instrument grade drive Motor with ball bearing output shaft and “sure grip” dual drive design. LightRail 5.0 is more than capable of moving 2 or 3 indoor grow lights side by side, or fore and aft, per crossbar. See specific grow light system product details farther below. -
LightRail 5.0 Rail Coupler: Exclusive to LightRail 5.0, this coupler is used for joining sections of the LightRail 5.0 Rails together. Each Rail Coupler comes with two LightRail 5.0 slide nuts (LR5 12 SN) and four LightRail 5.0 slide nut screws (LR5 12 SNS). US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. LightRail 5.0 Kit Side by Side: This product can move multiple crossbars, with each crossbar allowing grow lights to travel side by side, and this indoor growers kit has a zero to sixty second adjustable time delay for pausing the grow lights at the end of each run. The time delay helps promote even indoor plant growth from end to end and allows for equal grow light-time for the entire run. From its triple duty extruded aluminum track, wide and stable carriage with steel -on-steel carrier bearings to the high torque 4rpm instrument grade drive motor with ball bearing output shaft and “sure grip” dual drive design, LightRail 5.0 is more than capable of moving 2 or 3 indoor grow lights side by side, or fore and aft, per crossbar. The LightRail 5.0 Kit comes with a LightRail 5.0 Drive Motor, one crossbar with width span adjustable settings of 81”, 87” or 93”, instructions, mounting hardware and a 2-piece, 8’ (2.4 meters) total length Rail, so it’s long enough and ready for an extra Add-A-Bar Kit to purchase as a second crossbar. LightRail 5.0 will move up to 9 lights (or 6 lights to accommodate larger reflectors) with a single Motor. See photos below. Note: With LightRail 5.0, perfect balance is key and vent tubing can play havoc with that. We recommend that if you do have vented hoods, you use LightRail 3.5, 4.0 or 4.20. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com . Light Rail 5.0 Crossbar Mounting Kit – Inline Mount Option: Provides an optional inline configuration by allowing the crossbar to be positioned inline with the Rail. With this small hardware part, the crossbar can be turned 90 degrees so will run in the same direction as the Rail. This is instead of having the crossbar’s wingspan coming away from the Rail in the typical perpendicular crossbar configuration. -
Buy direct from the people who made it. Always in stock and typically ships same day. US locations, simply Add To Cart. Not in the US? Orders can be placed through sales@LightRail3.com. Auxiliary Trolley: The LightRail 5.0 Auxiliary Trolley is compatible with LightRail 5.0 exclusively and has many indoor grow equipment uses. And, it is the same Auxiliary Trolley that you would find in the Light Rail 5.0 Add A Bar Kit. See specific indoor grow equipment product details farther below.
