LightRail 4.0 Rails and Accessories

  • LightRail Strut Channel Compatible 6’6” Rail w/Two Fasteners: This custom light mover rail, with its unique top cut out and special fasteners, is made for easy attachment to strut channel, also known as Unistrut®. It comes with a custom fastening system of two connectors. And, these are specifically made for mounting these custom Rails to commercial strut channel. That mounting can be inline, perpendicular, at a 45, or at any angle and configuration. Note: Fits narrow strut channel at 1 5/8ths for size. Strut channel compatible Rails are a custom order item.  See specific indoor growing equipment product details farther below. Unistrut Rail Photo 2
  • Light Rail 2-Meter (6’6″) New Rail

    $69.00 $54.95
    LightRail 2-Meter (6’6”) New Rail: The 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • LightRail Add-A-Lamp Kit, Extreme Duty Trolley Wheels Now as Standard: As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover motor, and now with pre-installed Extreme Duty Trolley Wheels which are rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp in-line, along with adjustable run length and indoor grow light spacing. The Add A Lamp Kit includes a two-piece, 2 meter light mover rail (6’6” total length), a 6’ push/pull rod, an Auxiliary Trolley, hardware, and instructions. It comes complete. See specific indoor grow setup product details farther below.

  • Light Rail 3-Meter (9’9″) Blemished Rail

    $82.00 $65.95
    LightRail 3-Meter (9’9”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. This Rail consists of one 2-meter blemished Rail and one 1-meter Extender Rail, which is pinned so it slides into the main Rail, allowing the Motor to cross the seam. The blemished 3-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • LightRail Add-A-Lamp Kit, no Rail incl; match w/Strut Rail or LightRail Grow Tent, Extreme Duty Trolley Wheels Now as Standard: As part of your grow equipment, this is the easiest way to move a second or third indoor garden light all from your one LightRail light mover motor, and with Extreme Duty Trolley Wheels now as standard and rated to 60 lbs. Compatible with your existing LightRail 3.0, 3.5, 4.0 or 4.20 grow light system, the Add A Lamp Kit allows for extended coverage for an additional grow lamp. This Add A Lamp Kit includes a 6’ push/pull rod, in two 3’ sections with a coupler nut, an Auxiliary Trolley, hardware, and instructions. No Rail is included. Perfect Add A Lamp components to use in the LightRail Grow Tents since those grow tents already have an included Rail section , or to match with a Strut Channel Compatible Rail, should that be a better match for your space. Or, for any grow equipment setup, these are the perfect Add A Lamp components if you already have a Rail. See specific indoor grow setup product details farther below.

  • Auxiliary Trolley: The LightRail Auxiliary Trolley with Extreme Duty Trolley Wheels now as standard, and rated to 60 lbs. It is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and has many indoor grow equipment uses. It is the same Auxiliary Trolley that you would find in the Add A Lamp Kit. For uses, in addition to moving a second indoor grow light as part of the Add A Lamp Kit, it can also be used to aid in the securing of any vent tubing or grow light cords. See specific indoor grow equipment product details farther below.
  • Light Rail 2-Meter (6’6″) Blemished Rail

    $55.00 $43.95
    LightRail 2-Meter (6’6”) Blemished Rail: The blemishes on the Rail are purely cosmetic and will not affect the operation of your LightRail Drive Motor. The blemished 2-meter Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and will handle the heaviest grow lights (75 lbs) when the Rail is first mounted continuously along the Rail to a board, with the board then properly mounted to the ceiling making contact with the studs/joists. If mounted from the end points only, the Rail will hold 35 lbs. Note: We recommend using the board mount method to achieve that extra support.
  • LightRail 1-Meter (3’3″) Extender Rail

    $34.95 $27.95
    LightRail 1-Meter (3’3”) Extender Rail: The one meter Extender Rails have a variety of uses. When added to the standard 2-meter Rail, they can be used with the Auxiliary Trolley to aid in the festooning of vent tubing, or with the Add-A-Lamp components, they can enable two grow lights to run in a 9 foot (3 meter) configuration instead of a 12 foot (4 meters) configuration. Another use might be to run indoor garden lights over a 9 foot (3 meters) area instead of a 6 foot (2 meters) area during situations when less light is needed such as early growth/seedlings or with low light plants. The Extender Rail is compatible with LightRail 3.0, 3.5, 4.0 and 4.20 and comes with pins, allowing a Motor to cross the seam of the Rail.
     
  • Rail Hangers for Grow Tents and Greenhouses; Light Rail: Rail Hanger Brackets are simply the easiest solution to hanging the Rails of Light Rail 3.0, 3.5, 4.0 and 4.20 onto the support bars of an indoor grow tent or greenhouse. And, they come in packages of four (one package needed per Rail) with instructions and zip ties. So, it is complete. See specific indoor grow equipment product details farther below including compatibility specs.  
  • LightRail 4.0 or 4.20 Transformer: This is the replacement LightRail transformer power cord for the LightRail 4.0 Motor. And, this power cord comes as part of the LightRail 4.0 Motor, the LightRail 4.0 Kit and the LightRail 4.20 Kit. See specific indoor growing equipment product details farther below.
  • Light Rail RoboStik

    $41.00 $33.00
    Light Rail RoboStik: The 24" RoboStik is used for hanging a horizontal indoor grow light perpendicular to the direction of travel. So, this results in a wider pattern of indoor plant light coverage as your indoor grow light travels along the light mover rail. And, it's compatible with Light Rail 3.0, 3.5, 4.0 or 4.20. See specific grow light system details farther below along with two hanging techniques.
  • Light Rail Drive Wheel Replacement Kit

    $15.00 $12.00
    Light Rail Drive Wheel Replacement Kit: Compatible with Light Rail 3.0, 3.5, 4.0 and 4.20, the Drive Wheel Replacement Kit comes with the following: One black Drive Wheel, a tension spring, fasteners and instructions. Note: Drive Wheels are consumable items that will wear over time. So, as you need to, you can easily replace your Drive Wheel when needed. And, we have a video link to help.